One good turn

Monday 5th December was quite literally a pivotal moment for Team Britannia. It was the day the hull of the round the world superboat was finally turned right side up. Since construction began in June at the Aluminium Boatbuilding Company on Hayling Island, the internal framework and hull plates had all been assembled with the boat upside down, purely because it makes the job a lot easier, with gravity lending a helping hand as well. With all the continuous welding completed, the lower part of the hull was sanded down and given a coat of primer.

The actual process of turning the boat was painstaking, and took a whole day. The boat had already had parts welded on at bow and stern to support it during its rotation, held up at the bow by an “A” frame, and at the stern, suspended from a crane. But before the “giant hog roast” took place, the upside down hull had to be jacked up on wooden blocks before the crane took over. Team Britannia boss Alan Priddy admitted to one or two nervous flutters during the operation, but was delighted with the outcome.

With the boat finally the right way up, one gets a much better appreciation of its size, and that’s still without the wheelhouse, which has been assembled in the unit next door. Apart from craning the wheelhouse and fore and aft decks into place, the internal fit-out will be preceded by fitting the six massive fuel tanks, the engines and jet drives.

Tags: , , ,

Comments are closed.